Elbow 90° Spigot End Short Radius 1.2d size:Europress 316L S/S Elbow Stem 35mm R = 1.2d Europress 316L Equal Tee

Europress 316L Equal Tee

H is the dimension from the centre line of the pipe to the  end of the spigot

- Europress is Made of 316L stainless steel

The Small Adaptor Flange requires a loose backing ring (see Flanges & Backing Rings page) plus a gasket (see Gaskets & O-Rings) and provides a demountable connection of Europress pipe to other flanged equipment or pipes

The slip coupling is designed for joining  pipes of equal diameter but do not have an internal shoulder so that the fitting can be slid up one pipe

Elbow 90° Spigot End Short Radius 1.2d size:Europress 316L S/S Elbow Stem 35mm R = 1.2d Europress 316L Equal TeeThe Spigot Elbow is an equal Spigot x Adaptor fitting with the spigot size and the adaptor size identified as d in the table. These are the short radius elbows, being 1. 2 x the diameter of the pipe. L is the dimension from the centre line of the spigot to the other end of the fitting. Z is the dimension from the centre line of the spigot to the inserted end of the pipe. H is the dimension from the centre line of the pipe to the end of the spigot.