UP DOWN Pushbutton Manual Switch for DC Linear Actuator & Motor Controller (Model 0040025) 4 Channels AC Power Output the stroke value on the

the stroke value on the LED display will flash twice

connect two wires of another motor or linear actuator to terminals <B1> and <B2>

The operation of Interlocking mode with the transmitter CC-12:

3 or 4 linear actuators fully synchronously

Product Specifications Parameter Value Working Voltage DC 12V or DC 24V (24V most commonly used) Stroke 10 inches / 250 mm Optional Speed (No-load) 45±5mm/s

UP DOWN Pushbutton Manual Switch for DC Linear Actuator & Motor Controller (Model 0040025) 4 Channels AC Power Output the stroke value on thePackage Include: 1 x Manual Switch 1 x User Manual Introduction: This manual switch has two pushbuttons UP and DOWN. Each button has a set of normally open contacts. You can connect this manual switch to wired control terminals of the receiver, or connect to manual switch terminals of linear actuator synchronization controller, and then use it to control the DC motor or the linear actuator. Product Description: Two buttons: UP, DOWN Work Mode: